Development Boards

ET-ROBOT

Features
  • Includes Microchip PIC16F877 Microcontroller with 8kb internal Flash Program Memory
  • Solid Anodized Aluminium Base for Strength and Light Weight
  • 2 DC Motors Installed, for turning and forward/reverse motion
  • LCD Installed (2x16 Characters)
  • On-Board Programming using RS232 with MAX232 Installed
  • 4 Channel 10-Bit A/D Converter
  • Micro-switches for collision detection
  • Optical Sensors for Line Tracking
  • Power LED, Direction LED's and Reset Button
  • On-Board Battery for Complete Freedom of Operation
  • Real Time Clock (DS1307 Optional)
  • EEPROM (24LCXXX Option)
  • Buzzer
  • Code Examples Provided
  • Great as a learning tool for robotics and microcontrollers



ET-ROBOT

LPC2148_USB1
Features
  • Includes Philips LPC2148 Microcontroller with 512kBytes of Memory
  • Direct USB Computer Connection for Program Download and Monitoring (USB 2.0 Compliant)
  • Fully Assembled and Ready to Run
  • 4 Pushbuttons with Speaker On-Board
  • 4 Variable Trimpots for Adjustable Analogue Inputs
  • 4 Red Test LED's
  • Breadboard Included
  • JTAG Connector
  • LCD Connector with Contrast Adjustment
  • Power and Programming LED
  • Ideal for LPC2148 Program Development and Testing



LPC2148_USB1

DSPICBRD4
Features
  • Includes Microchip dsPIC30F2010 Microcontroller
  • All necessary power supply components are pre-installed and board is ready-to-run
  • Direct In-Circuit Program Download with RS-232 Connection or standard PIC 6-pin In-Circuit Programming Connection
  • 4 Pushbuttons with Speaker On-Board
  • 4 Variable Trimpots for Adjustable Analogue Inputs
  • 4 Red Test LED's
  • Large Breadboard
  • RS232 Connection
  • Selectable PROG-RUN Switch
  • Power and Programming LED
  • Ideal Training and Development Board for the dsPIC30F2010 Microcontroller
Note: dsPIC is a registered trademark of Microchip Corporation



DSPICBRD4

TMS320-P28016-1-DSP-32 bit Board
Features
  • MCU: TMS320F28016 32KB Flash, 12 KB RAM, 3.75 MPSP 2 x 8 channel ADCs, 8 PWM, CAN, SPI, RS232, I2C
  • JTAG connector
  • USB-to-RS232 convertor allow easy to power board and to connect to notebooks and decent computers without RS232 port
  • CAN driver and connector
  • UEXT connector with SPI, RS232, I2C for connection to other Olimex modules as MOD-NRF24Lx, MOD-MP3, etc.
  • MOTOR control connector (for add on modules with ADC, PWM, Interrupt signals available)
  • User button
  • Trimmer potentiometer connected to Analog input
  • power supply LED
  • user status LED
  • RST button
  • external power supply jack for AC or DC power supply
  • Voltage regulator + power supply filtering capacitor
  • extension headers for each uC pin
  • prototype area with 0.1" step, Vcc + GND bus
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions: 100x80 mm (3.9x3.15")
TMS320-P28016-1-DSP
32 bit Board

LPC-P2919-ARM9 Philips Development Board
Features
  • MCU: LPC2919 ARM968E-S, 125 MHz, CAN, LIN, 56 kB SRAM, 768 kB flash, x2 10-bit ADCs JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG, ARM-USB-OCD, ARM-USB-TINY RS232 port
  • two CAN drivers and connectors
  • two LIN drivers and connectors
  • LCD 8X1 SD/MMC card connector
  • two user buttons trimpot connected to ADC RESET circuit and button
  • three status LEDs
  • power supply LED jumper for Power Selection mode
  • three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
  • single power supply: External power supply +9VDC required, or takes power from JTAG connector 16 Mhz crystal oscillator UEXT connector with SPI, RS232 and power supply for connecting add-on modules Extension port connector for many of microcontrollers pins
  • Prototype area PCB: FR-4, 1.5 mm (0,062"), red soldermask, silkscreen component print Dimensions: 140x89mm (5.512x3.504")



LPC-p2919-arm9
Philips Development Board

STM32-103STK-1 Development Board
Features
  • MCU: STM32F103RBT6 ARM 32 bit CORTEX M3™ with 128K Bytes Program Flash, 20K Bytes RAM, USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 72Mhz operation standard
  • JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG USB mini connector
  • LCD NOKIA 3310 BW 84x48 pixels
  • 1.5V battery connector with step-up converter 3-axis accelerometer SD-MMC card
  • 2.4 Ghz transciever with Nordic nRF23L01 Audio input Audio output user buttions
  • x2 Joystick with 4 directions and push action UEXT connector for other Olimex's modules connection like MOD-MP3, etc.
  • RESET button status LED 8 Mhz crystal oscillator 32768 Hz crystal and RTC backup battery connector extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print Dimensions: 90 x 65mm (3.5 x 2.5")



STM32-103STK-1


STM32-103STK-1
Bottom

SAM9-ARM9 Atmel Development Board
Features
  • MCU: AT91SAM9260 16/32 bit ARM9™ 180MHz operation standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG 64 MB SDRAM 512MB NAND Flash (seen in Linux as silicon drive)
  • Ethernet 100Mbit connector
  • USB host and USB device connectors RS232 interface and drivers
  • SD/MMC card connector
  • one user button and one reset button one power and two status LEDs
  • on board voltage regulator 3.3V with up to 800mA current
  • single power supply: 5V DC required power supply filtering capacitor 18.432 Mhz crystal on socket extension header
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print Dimensions: 100 x 80 mm (3.94 x 3.15")



SAM9-ARM9 Atmel


SAM9-ARM9 Atmel
Bottom

Analog Devices - Arm7 Development Board
Features
  • MCU: ADuC7026 16/32 bit ARM7TDMI-S™ with 64K Bytes Program Flash, 8K Bytes RAM, 12 channel 12 bit ADC with 1Msps, 4 channels 12 bit DACs, on chip Vref,
  • onchip temperature sensor, UARTs, 2x I2C, SPI,
  • Three phase PWM, PLA programmable logic, external memory interface, 2x 32bit TIMERS, WDT, 5V tolerant I/O, up to 45MHz operation ARM JTAG 2x10 pin connector RESET circuit USB-RS232 convertor two status LED two buttons two trimmer potentiometers connected to ADC inputs bi-color LED connected to two DACs SD and RESET buttons for easy bootloader enable power supply LED on board voltage regulator 3.3V with up to 800mA current power supply filtering capacitor powered from USB port no need for external power supply adapter connector for external power supply if USB is not present 32768 Hz crystal extension headers for all microcontroller ports prototype area with split analogue and digital area PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print Dimensions: 100x80 mm (3.9x3.15")



Analog Devices - Arm7

CS-E9302-1 Development Board
Features
  • MCU: EP9302 ARM920T 200Mhz, 16+16KB instruction and data cache, MMU, SDRAM, SRAM,
  • FLASH external bus controller 100Mhz bus,
  • 100Mbit Ethernet MAC,
  • two UARTS, two USB 2.0 ports, IrDA, ADC, SPI, I2S Audio, AC97, DMA 12 ch, RTC, dual PLL, WDT, 2- 16 bit, 1- 32 bit TIMERS, boot ROM, interrupt controller,
  • external SDRAM 32MB (16MB x16bit) 7.5 ns /133Mhz
  • external Flash 16MB (8MB x16 bit) 80 ns ETHERNET 10/100 PHY KS8721BL 2 x RS232 drivers and connectors
  • 2 x USB host connectors SD/MMC card IrDA transciever
  • on board UEXT connector with I2C, SPI, RS232 and power supply for connecting add-on modules like RF link, MP3, etc available from Olimex JTAG interface ADC extension port
  • power supply plug in jack Linux 2.4, Linux 2.6 and NetBSD sources and pre-build images ready to load with Redboot are available on the supplement CD dimensions: 110x90 mm (4.3 x 3.5")



CS-E9302-1

TMS470-P256 Development Board
Features
  • TMS470A256 16/32-Bit ARM7TDMI microcontroller
  • 256KB Flash, 12KB SRAM, CAN, 2x SPI, 2x UART, C2SIb, HET, 10bit MibADC 1.55uS, WDT,
  • up to 48 MHz operation standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG CAN connector and driver RS232 interface and drivers SD/MMC card connector
  • LCD 16x2 with backlight three buttons trimpot connected to ADC thermistor connected to ADC Buzzer UEXT - 10 pin extension connector for Olimex
  • addon peripherials like MP3, RF2.4Ghz, RFID etc. modules
  • on board voltage regulator and reset monitor
  • single power supply: 6V AC or DC required power supply LED power supply filtering capacitor
  • RESET button 12 Mhz crystal on socket ANALOG extension port connecotr DIGITAL extension port connector for all uC ports PCB: FR-4, 1.5 mm (0,062"), soldermask,
  • silkscreen component print Dimensions: 145 x 99 mm (5.7 x 3.9 ")



TMS470-P256

Click here and see more products
http://www.indiamart.com/hond-i-integratedtechnologies/